Products
Temporary Track Clamp
Product Overview Temporary track clamps provide immediate rail continuity for emergency repairs when conventional splicing isn't possible. These heavy-duty mechanical clamps maintain track alignment and load transfer capabilities until permanent repairs can be completed. learn more Key...
Features
Product Overview
Temporary track clamps provide immediate rail continuity for emergency repairs when conventional splicing isn't possible. These heavy-duty mechanical clamps maintain track alignment and load transfer capabilities until permanent repairs can be completed.
Rapid Installation - Deploys in <15 minutes
Universal Compatibility - Adjustable jaws fit 80-175 lb/yd rails
High-Strength Construction - Forged alloy steel with 500 MPa tensile strength
Corrosion Resistant - Zinc-nickel plated for outdoor use
Reusable Design - Up to 50 installations per clamp
more
Technical Specifications
| Parameter | Standard Model | Heavy-Duty Model |
|---|---|---|
| Rail Range | 80-136 lb/yd | 140-175 lb/yd |
| Clamp Weight | 18.5 kg | 27.2 kg |
| Bolt Size | M24 | M30 |
| Torque Spec | 350 Nm | 450 Nm |
| Max Speed | 40 km/h | 25 km/h |
| Temp Range | -30°C to +60°C | -40°C to +80°C |
1
Clean contact surfaces
Maintain 4-6mm expansion gap
2
Center over rail joint
Align with rail web
3
Hand-tighten all bolts
Torque in star pattern to specification
4
Check full jaw contact
Confirm proper alignment
Applications
Rail fractures - Immediate stabilization
Compromise joints - Temporary strength restoration
Insulated joint failures - Maintain signal continuity
Bridge transitions - Emergency alignment correction
FAQ
Q: What is an emergency rail clamp?
A: An emergency rail clamp is a safety device that instantly stops rail-mounted equipment (like cranes or trolleys) during malfunctions or power failures. It automatically engages when detecting overspeed, power loss, or manual activation, preventing dangerous uncontrolled movements.
Q: When should rail clamps be used?
A: Mandatory for:
Overhead cranes in human work areas
Sloped rail applications (>3° incline)
Environments with frequent power fluctuations
Critical load handling (hazardous materials)
Q: How does the clamping mechanism work?
A: Our clamps use spring-loaded, fail-safe design:
Power holds jaws open during normal operation
On activation, springs force tungsten-carbide teeth into rail
Creates 3-point contact with 4x safety factor over rated load
Hot Tags: temporary track clamp, China temporary track clamp manufacturers, suppliers, factory
You Might Also Like
Send Inquiry
