Rail Iron Shoulder

Rail iron shoulders are very important for railway construction. The quality and installation of rail iron shoulders cannot be ignored for safe railway transportation. Next, let’s learn more about it!

1. The rail iron shoulder is reasonably designed and there is no impact during the installation process. It is fixed on a valve body with bolts and there is no damage or fall off during use, which solves the problem of damage and loss of the anti-needle device. The rail support design is advanced, the structure is simple, and it is easy to install and maintain;
2. Long service life. The rail anchor has very good anti-climbing effect, large anti-climbing resistance, durable anti-climbing and easy to use. Be greeted and greeted by construction workers on site
3. Good anti-climbing performance and advanced technology. It is reliable in anti-climbing, does not relax, does not fall off, has a long-lasting effect, has large anti-climbing resistance and has good anti-climbing effect.
4. The cost of use is very low. Therefore, the maintenance cycle is long, which greatly reduces maintenance and maintenance costs.
5. Railway anchors can greatly reduce line diseases caused by line crawling, and can also improve lightning resistance, playing an important role in improving line quality and ensuring production safety. 

When assembling, you should first determine the direction to prevent the rail from crawling, place the wooden bearing plate, and fix the main body and auxiliary body of the rail anchor on the bottom edge of the rail so that the movable surface of the rail shoulder is consistent with the moving direction of the rail, and then move it according to the rail. Insert the connecting bolt into one end of the anchor body, add a flat washer and a spring ring, and screw the nut so that the movable surface of the rail anchor is consistent with the movement direction of the rail. The rail anchor is in close contact with the wooden bearing plate, and the bolts are finally tightened with a torque of 150Nm. After 2 to 3 weeks of use, tighten the connecting bolts. It should be noted that it is strictly forbidden to hit the installed rail anchor with a heavy hammer to avoid damaging the rail anchor under high stress.

Hot Tags: rail iron shoulder, China rail iron shoulder manufacturers, suppliers, factory