Railway G type rail clamp operation procedure
Railway G type rail clamp operation procedure
Rail G clamps (also known as rail clamps or clamps) are an important piece of equipment used to secure rail, especially when the track is repaired, laid or adjusted.
Preparation work
Check that the rail clamp is intact and has no damage or cracks.
Make sure all necessary tools and materials are on site, such as wrenches, hammers, bolts, gaskets, etc.
Clean up debris around rail and installation location to ensure safe working area.
Installing rail clamps
Place the rail clamp in a pre-marked position, making sure it fits tightly to the rail.
Depending on the design of the rail clamp, it may be necessary to use bolts, nuts or other fasteners to secure it to the rail.
Using a wrench or other appropriate tool, tighten the fastener to ensure that the rail clamp is securely attached to the rail.
Adjustments
Adjust the position or Angle of the rail clamp as needed to ensure that it can effectively secure the rail.
Use appropriate tools (such as wrenches, screwdrivers, etc.) for fine tuning.
Check
After the installation is complete, carefully check the fastening of the rail clamp to ensure that all fasteners are properly tightened.
Shake or tap the rail clamp to check that it is secure and not loose or wobbly.
