Rail Shoulder Installation Guide

 

Tools and Materials Required

Rail shoulders (appropriate type and size for the rail)

Rail fasteners (clips, bolts, etc.)

Rail anchors

Measuring tape

Spirit level

Torque wrench

Hydraulic jack or rail lifting device

Rail gauge

Brush or compressed air for cleaning

Lubricant (if required)

Safety gear (gloves, safety glasses, helmet, etc.)

 

Installation Steps

Step 1: Positioning the Rail Shoulder

Lift the Rail: Use a hydraulic jack or rail lifting device to lift the rail slightly above the sleeper.

Place the Rail Shoulder: Position the rail shoulder correctly under the rail base, ensuring it aligns with the sleeper and rail profile.

 

Step 2: Securing the Rail Shoulder

Attach Rail Fasteners: Secure the rail shoulder to the sleeper using appropriate rail fasteners (clips, bolts, etc.). Ensure that the fasteners are tightened to the manufacturer's specified torque using a torque wrench.

Install Rail Anchors: If required, install rail anchors to prevent longitudinal movement of the rail.

 

Step 3: Final Checks Check

Alignment: Use a rail gauge to verify that the rail is correctly aligned and spaced.

Verify Level: Ensure the rail is level using a spirit level.

Inspect Fasteners: Double-check that all fasteners are securely tightened and that the rail shoulder is firmly seated.